PWM controller, power supply and 4 PWM amplifiers
Front panel of Drive Box
Taig CNC-ready mill fitted with DC servo motors
|This Taig mill was fitted with DC servo motors, and was tested to 120 IPM rapid feedrates. It maintained a servo following error of only .005" even at this high travel rate. Following error at normal rates was no more than .0002".|
Pico Systems is currently evaluating the price point at which we could make complete drive systems available as a bolt-on kit. The big items we still have to deal with are electromagnetic compatibility (FCC) and safety testing.
The drive box is 10.5 x 11 x 5" and weighs only 15 Lbs.
Wiring diagram for motor/encoder cable
You can contact Pico Systems at : (314) 965-5523 or 543 Lindeman Rd. Kirkwood, MO 63122 or email@example.com